# 2d Fluid Controlling Heightfield?

**URL:** https://forum.highend3d.com/t/2d-fluid-controlling-heightfield/41068
**Category:** Maya
**Tags:** fluids
**Created:** [August 31, 2007, 1:58pm UTC](https://forum.highend3d.com/t/2d-fluid-controlling-heightfield/41068 "2007-08-31T13:58:19Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![kafl](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/k/d2c977/32.png) [@kafl](https://forum.highend3d.com/u/kafl)
#### Post date: [August 31, 2007, 1:58pm UTC](https://forum.highend3d.com/t/2d-fluid-controlling-heightfield/41068/1 "2007-08-31T13:58:19Z")

</div>

Hello there

I've been playing arround with the heightField node, and even though i can connect a ramp/noise texture or anything else, i can not connect a 2d fluid texture to it. Tryed a few ways now, tried to connect either R colour or R transparancy, but with no luck, also tried connecting through either ramp, or RGB - luminance noide, but no luck, so any help would be very apreciatet.

Btw. it all works fine when just connecting to displacement of a shader and render out.

Thank you  
Karsten

---

<div class="post-metadata">

### Author: ![kafl](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/k/d2c977/32.png) [@kafl](https://forum.highend3d.com/u/kafl)
#### Post date: [September 4, 2007, 8:45pm UTC](https://forum.highend3d.com/t/2d-fluid-controlling-heightfield/41068/2 "2007-09-04T20:45:24Z")

</div>

Please any one?

Would be happy with just a possible or impossible 🙂 just to know if its possible.

Thank you

---

<div class="post-metadata">

### Author: ![petershipkov](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/p/7ab992/32.png) [@petershipkov](https://forum.highend3d.com/u/petershipkov)
#### Post date: [September 5, 2007, 6:23am UTC](https://forum.highend3d.com/t/2d-fluid-controlling-heightfield/41068/3 "2007-09-05T06:23:46Z")

</div>

Maybe you can simply render the fluids to image sequence and read it back.

As a side note i suggest you to dump the highFielfd thing and use instead the outline feature of the pfxToon system. Much-much better and robust.

---

<div class="post-metadata">

### Author: ![duncanbrinsmead](https://forum.highend3d.com/user_avatar/forum.highend3d.com/duncanbrinsmead/32/395_2.png) [@duncanbrinsmead](https://forum.highend3d.com/u/duncanbrinsmead)
#### Post date: [September 5, 2007, 8:16pm UTC](https://forum.highend3d.com/t/2d-fluid-controlling-heightfield/41068/4 "2007-09-05T20:16:18Z")

</div>

The fluid nodes generally cannot be previewed with heightfield nodes( the exception is the fluid wake setup for oceans ).

However you can enable the fluid's "use heightfield" and "surface render" attributes, in which case the output opacity of the fluid is used for a height displacement (without needing a heightfield node).

Duncan
