# A7V & VX1 not booting?!?!

**URL:** https://forum.highend3d.com/t/a7v-vx1-not-booting/71196
**Category:** Archived
**Tags:** hardware-discussions
**Created:** [April 2, 2001, 1:46am UTC](https://forum.highend3d.com/t/a7v-vx1-not-booting/71196 "2001-04-02T01:46:38Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![forme3d](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/f/eada6e/32.png) [@forme3d](https://forum.highend3d.com/u/forme3d)
#### Post date: [April 2, 2001, 1:46am UTC](https://forum.highend3d.com/t/a7v-vx1-not-booting/71196/1 "2001-04-02T01:46:38Z")

</div>

Well I have seen others complain about how an Oxygen VX1 hangs when using Maya, but my system won’t finish booting  
when i install my oxygen vx1 card into my system: I have read the other posts and have installed the following:-

- Window 2000 sp 1
- latest via four-in-one driver
- latest windows 2000 agp support fix file

and upon reboot it shows the Win2K splash screen, the progress meter finished but then it goes black with a flashing  
cursor??? Any solutions to this issue? I have the latest Oxygen drivers ready to install as soon as I get past the boot!  
Thanks,  
Mike

View my Maya project progress at:  
**[http://www.allenagenda.com/projects.htm](http://www.allenagenda.com/projects.htm)**\*

---

<div class="post-metadata">

### Author: ![forme3d](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/f/eada6e/32.png) [@forme3d](https://forum.highend3d.com/u/forme3d)
#### Post date: [April 2, 2001, 1:47am UTC](https://forum.highend3d.com/t/a7v-vx1-not-booting/71196/2 "2001-04-02T01:47:47Z")

</div>

Oh yah, I have a 1.0 Ghz AMD athlon chip…that is why I installed the latest via chipset driver…

View my Maya project progress at:  
**[http://www.allenagenda.com/projects.htm](http://www.allenagenda.com/projects.htm)**\*

---

<div class="post-metadata">

### Author: ![jandrew](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/j/a9adbd/32.png) [@jandrew](https://forum.highend3d.com/u/jandrew)
#### Post date: [April 2, 2001, 6:40pm UTC](https://forum.highend3d.com/t/a7v-vx1-not-booting/71196/3 "2001-04-02T18:40:04Z")

</div>

I set up a VX1 with a KA-chipset motherboard (Athlon Slot-A) on the weekend, with a Tnt2 PCI as the second card. I found that I needed to boot to PCI first, then install the VX1 drivers and set it to boot from AGP after that. I used the new drivers, which are dated March 28th.

Sean

---

<div class="post-metadata">

### Author: ![forme3d](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/f/eada6e/32.png) [@forme3d](https://forum.highend3d.com/u/forme3d)
#### Post date: [April 2, 2001, 6:44pm UTC](https://forum.highend3d.com/t/a7v-vx1-not-booting/71196/4 "2001-04-02T18:44:50Z")

</div>

Thanks for the input! I rebooted and pressed f8 to get into VGA safe mode. Then I installed the latest win2k VX1 drivers  
and rebooted and it works now. Using Maya 3.0a I notice that when I change from the move, rotate, scale tool the selections have to be clicked several times before selection handles (x,y,z) change from one mode to the other. Do you get this?

View my Maya project progress at:  
**[http://www.allenagenda.com/projects.htm](http://www.allenagenda.com/projects.htm)**\*
