# Abit KG7 raid

**URL:** https://forum.highend3d.com/t/abit-kg7-raid/70814
**Category:** Archived
**Tags:** hardware-discussions
**Created:** [September 3, 2001, 8:57am UTC](https://forum.highend3d.com/t/abit-kg7-raid/70814 "2001-09-03T08:57:43Z")
**Posts on this page:** 6
**Page:** 1

<div class="post-metadata">

### Author: ![rokl](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/r/db5fbb/32.png) [@rokl](https://forum.highend3d.com/u/rokl)
#### Post date: [September 3, 2001, 8:57am UTC](https://forum.highend3d.com/t/abit-kg7-raid/70814/1 "2001-09-03T08:57:43Z")

</div>

Anyone using this board? I read that if you have more than two memory modules you need DDR registered RAM which is quite more expensive than non-registered. Can anyone confirm this?

rokl

---

<div class="post-metadata">

### Author: ![skelter](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/s/ecd19e/32.png) [@skelter](https://forum.highend3d.com/u/skelter)
#### Post date: [September 3, 2001, 9:31am UTC](https://forum.highend3d.com/t/abit-kg7-raid/70814/2 "2001-09-03T09:31:14Z")

</div>

That’s truth but the KG7 is very stable.

In Gold They Trust.

---

<div class="post-metadata">

### Author: ![rokl](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/r/db5fbb/32.png) [@rokl](https://forum.highend3d.com/u/rokl)
#### Post date: [September 5, 2001, 8:16am UTC](https://forum.highend3d.com/t/abit-kg7-raid/70814/3 "2001-09-05T08:16:43Z")

</div>

Is there maybe any other good 266 board that accepts more than two DDR RAM modules but also non-registered?

rokl

---

<div class="post-metadata">

### Author: ![skelter](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/s/ecd19e/32.png) [@skelter](https://forum.highend3d.com/u/skelter)
#### Post date: [September 5, 2001, 7:08pm UTC](https://forum.highend3d.com/t/abit-kg7-raid/70814/4 "2001-09-05T19:08:55Z")

</div>

The registred ECC DDram are just a little more xpensive than the non registred so get registred ones…

In Gold They Trust.

---

<div class="post-metadata">

### Author: ![dpd902](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/d/41988e/32.png) [@dpd902](https://forum.highend3d.com/u/dpd902)
#### Post date: [September 13, 2001, 8:10pm UTC](https://forum.highend3d.com/t/abit-kg7-raid/70814/5 "2001-09-13T20:10:07Z")

</div>

I just finished setting up one with 1.5GB (3x512) of plain old DDR (Kingston KVR266X64C25/512). It is working fine.

shawn

> [@](#):
>
> In reply to:  
> Anyone using this board? I read that if you have more than two memory modules you need DDR registered RAM which is quite more expensive than non-registered. Can anyone confirm this?
> 
> rokl

---

<div class="post-metadata">

### Author: ![rokl](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/r/db5fbb/32.png) [@rokl](https://forum.highend3d.com/u/rokl)
#### Post date: [September 14, 2001, 7:41am UTC](https://forum.highend3d.com/t/abit-kg7-raid/70814/6 "2001-09-14T07:41:07Z")

</div>

> [@](#):
>
> In reply to:  
> I just finished setting up one with 1.5GB (3x512) of plain old DDR (Kingston KVR266X64C25/512). It is working fine.
> 
> shawn

Thanks Shawn for the info.

rokl