# Cloverfield Monster Concept

**URL:** https://forum.highend3d.com/t/cloverfield-monster-concept/66451
**Category:** Archived
**Tags:** gallery-image
**Created:** [May 21, 2009, 5:18pm UTC](https://forum.highend3d.com/t/cloverfield-monster-concept/66451 "2009-05-21T17:18:08Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![wonderbhoy](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/w/ccd318/32.png) [@wonderbhoy](https://forum.highend3d.com/u/wonderbhoy)
#### Post date: [May 21, 2009, 5:18pm UTC](https://forum.highend3d.com/t/cloverfield-monster-concept/66451/1 "2009-05-21T17:18:08Z")

</div>

Hey Everyone,

This is my first post. I modeled and textured this guy for my final project for my lighting and texturing class. It was a cloverfield concept that I kinda took my own direction as far as texturing goes. Looking for some feedback as I am not too sure about the texture. It has a color, bump, and spec map applied to the Maya SSSfastskin shader.

![](http://i18.photobucket.com/albums/b116/broness/monsterHD.jpg)

![](http://i18.photobucket.com/albums/b116/broness/side.jpg)

![](http://i18.photobucket.com/albums/b116/broness/mouth.jpg)

---

<div class="post-metadata">

### Author: ![joojaa](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/j/5daacb/32.png) [@joojaa](https://forum.highend3d.com/u/joojaa)
#### Post date: [May 21, 2009, 5:22pm UTC](https://forum.highend3d.com/t/cloverfield-monster-concept/66451/2 "2009-05-21T17:22:20Z")

</div>

Well the lighting is a bit too uniform. Also would be nice if youd put in some internal parts thst would block the subsurface scattering

---

<div class="post-metadata">

### Author: ![wonderbhoy](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/w/ccd318/32.png) [@wonderbhoy](https://forum.highend3d.com/u/wonderbhoy)
#### Post date: [May 21, 2009, 6:10pm UTC](https://forum.highend3d.com/t/cloverfield-monster-concept/66451/3 "2009-05-21T18:10:09Z")

</div>

I tried putting geometry inside but it did nothing to block the SSS, i wasn’t sure what the problem was.

As far as lighting, would you recommend a light set up? I kinda winged it with 2 spot lights in the back, a key light from the front side and fill light from the other side. Maybe assigning some rich colors to them and playing with intensity would help?

---

<div class="post-metadata">

### Author: ![joojaa](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/j/5daacb/32.png) [@joojaa](https://forum.highend3d.com/u/joojaa)
#### Post date: [May 22, 2009, 10:26am UTC](https://forum.highend3d.com/t/cloverfield-monster-concept/66451/4 "2009-05-22T10:26:30Z")

</div>

QUOTE(TylerBronis @ 05/21/09, 09:10 PM) [snapback]308141[/snapback]  
I tried putting geometry inside but it did nothing to block the SSS, i wasn’t sure what the problem was.

The sss only sees objects in the same SSS tree for the internal SSS sim. So make a shading switch that makes part of the objects black in sss then assign them into same network.
