# Elbow Joint "locks Up" -- Stops Rotating

**URL:** https://forum.highend3d.com/t/elbow-joint-locks-up-stops-rotating/47909
**Category:** Maya
**Tags:** rigging-character
**Created:** [February 3, 2008, 8:13pm UTC](https://forum.highend3d.com/t/elbow-joint-locks-up-stops-rotating/47909 "2008-02-03T20:13:45Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![locvio](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/l/b77776/32.png) [@locvio](https://forum.highend3d.com/u/locvio)
#### Post date: [February 3, 2008, 8:13pm UTC](https://forum.highend3d.com/t/elbow-joint-locks-up-stops-rotating/47909/1 "2008-02-03T20:13:45Z")

</div>

I've seen this couple of times.. An elbow (or a knee) joint "locks up" stops rotating when in IK mode.  
(the arm stays straight no matter where the ik handle is dragged.) t  
Migh've been something i've done inadvertently, but can't seem to find it. (it was already working previously).  
thanks!

---

<div class="post-metadata">

### Author: ![locvio](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/l/b77776/32.png) [@locvio](https://forum.highend3d.com/u/locvio)
#### Post date: [February 3, 2008, 8:58pm UTC](https://forum.highend3d.com/t/elbow-joint-locks-up-stops-rotating/47909/2 "2008-02-03T20:58:20Z")

</div>

Got it..   
Inadvertently changed the preferred angle on the elbow joint. This caused the lock up.  
thx,
