# Help with displacement! (pics)

**URL:** https://forum.highend3d.com/t/help-with-displacement-pics/62194
**Category:** Xsi
**Tags:** general
**Created:** [May 10, 2002, 1:53pm UTC](https://forum.highend3d.com/t/help-with-displacement-pics/62194 "2002-05-10T13:53:09Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![ovni](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/o/c89c15/32.png) [@ovni](https://forum.highend3d.com/u/ovni)
#### Post date: [May 10, 2002, 1:53pm UTC](https://forum.highend3d.com/t/help-with-displacement-pics/62194/1 "2002-05-10T13:53:09Z")

</div>

I’m having a hard time getting my displacement maps to work… I followed the tutorial at [http://dishinpeter.hihome.com/tutorial/tut3d/tutorial7/disp1.htm](http://dishinpeter.hihome.com/tutorial/tut3d/tutorial7/disp1.htm)[http://dishinpeter.hihome.com/tutorial/tut…rial7/disp1.htm](http://dishinpeter.hihome.com/tutorial/tut3d/tutorial7/disp1.htm) but still can’t seem to get it to work!

Here is my object BEFORE I connect the displacement map (the texture on the object is also the displacement map):

![](http://plaza.ufl.edu/jrapczak/media/coin.jpg)

Now, when I connect the texture to the displacement of the material as per the tutorial above, THIS happens:

![](http://plaza.ufl.edu/jrapczak/media/help.jpg)

ANY help you can give me would be great. Thanks!

Jesse

---

<div class="post-metadata">

### Author: ![alper455](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/a/f07891/32.png) [@alper455](https://forum.highend3d.com/u/alper455)
#### Post date: [May 10, 2002, 4:08pm UTC](https://forum.highend3d.com/t/help-with-displacement-pics/62194/2 "2002-05-10T16:08:16Z")

</div>

this is the hard edge fault, the solution is to make the displacement map black where there is a hard edge  
or to grow up the discontinuity of your object  
someone on the softimage list gave this solution:

you can trick the effect of “hard” polygons in the  
rendertree, by plugging the “Vector\_state” node set to “Geometric  
normal” mode, straight into the Bump input of the material node.

hope this help
