# Importing LW meshes/UVs

**URL:** https://forum.highend3d.com/t/importing-lw-meshes-uvs/62818
**Category:** Xsi
**Tags:** general
**Created:** [February 1, 2001, 4:00pm UTC](https://forum.highend3d.com/t/importing-lw-meshes-uvs/62818 "2001-02-01T16:00:15Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![borisz](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/b/7ba0ec/32.png) [@borisz](https://forum.highend3d.com/u/borisz)
#### Post date: [February 1, 2001, 4:00pm UTC](https://forum.highend3d.com/t/importing-lw-meshes-uvs/62818/1 "2001-02-01T16:00:15Z")

</div>

Still waiting for 1.5. Can’t wait to crash-test those Subds. Modeling and Texturing in Lightwave 6.5 is phenomenal IMO (too bad the animation toolset is short one animation mixer). Anyone know if it is possible to get a mesh from Lightwave to XSI 1.5 with discontinuous UV’s intact?

---

<div class="post-metadata">

### Author: ![mike-heintzman](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/m/839c29/32.png) [@mike-heintzman](https://forum.highend3d.com/u/mike-heintzman)
#### Post date: [February 1, 2001, 4:06pm UTC](https://forum.highend3d.com/t/importing-lw-meshes-uvs/62818/2 "2001-02-01T16:06:11Z")

</div>

The only way i can think of that “I would trust” - is using polytrans. - you could try obj export from lightwave - but i dont know about that.

- Non smokers die every day.

---

<div class="post-metadata">

### Author: ![fieliep](https://forum.highend3d.com/user_avatar/forum.highend3d.com/fieliep/32/467_2.png) [@fieliep](https://forum.highend3d.com/u/fieliep)
#### Post date: [February 3, 2001, 7:36am UTC](https://forum.highend3d.com/t/importing-lw-meshes-uvs/62818/3 "2001-02-03T07:36:48Z")

</div>

Hi Fezzini,

Dont need to use obj .  
the most straightforward way is to get this free hrc exporter plug-in from  
DStorm’s website at:  
[http://www.dstorm.co.jp/~taz/plugin65.html](http://www.dstorm.co.jp/~taz/plugin65.html)

this will save a hrc file of your LW mesh.  
The critical thing to remember is to save it off to a  
an existing Soft 3.x database folder (models) otherwise  
XSI will only use a null object in its place.

Incidentally if you want to bring the hrc into Soft3.x you can  
save it anywhere.

I dont know how well the hrc exporter handles UV data  
although there are options in the interface.

If you still prefer to build your low res cage in LW this  
can be brought into XSI for subdivision/geometry approximation! (Note unlike LW, XSI doesnt need quads for  
subD’s)  
Hope this helps.

Dave K

---

<div class="post-metadata">

### Author: ![borisz](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/b/7ba0ec/32.png) [@borisz](https://forum.highend3d.com/u/borisz)
#### Post date: [February 4, 2001, 4:13pm UTC](https://forum.highend3d.com/t/importing-lw-meshes-uvs/62818/4 "2001-02-04T16:13:11Z")

</div>

Thank you.
