# Ncloth As Pliable Wall?

**URL:** https://forum.highend3d.com/t/ncloth-as-pliable-wall/40586
**Category:** Maya
**Tags:** cloth
**Created:** [March 24, 2009, 4:49am UTC](https://forum.highend3d.com/t/ncloth-as-pliable-wall/40586 "2009-03-24T04:49:49Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![marzz](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/m/a5b964/32.png) [@marzz](https://forum.highend3d.com/u/marzz)
#### Post date: [March 24, 2009, 4:49am UTC](https://forum.highend3d.com/t/ncloth-as-pliable-wall/40586/1 "2009-03-24T04:49:49Z")

</div>

Hi, I' m new to animating and I have quite ambitious first project.  
I need to create the effect of the fish sticking out of the wall, by pushing the surface of the wall out with its shape. The wall would have a thick paint like property. The fish model would only be visible through the imprint in the wall.

So far I have made a model and animated it, and now I'm experimenting with the n cloth. Ncloth seams to have characteristics of its own that I'm not successfully overcoming. Does anyone have any helpful advices? ![]()

---

<div class="post-metadata">

### Author: ![duncanbrinsmead](https://forum.highend3d.com/user_avatar/forum.highend3d.com/duncanbrinsmead/32/395_2.png) [@duncanbrinsmead](https://forum.highend3d.com/u/duncanbrinsmead)
#### Post date: [March 25, 2009, 12:52am UTC](https://forum.highend3d.com/t/ncloth-as-pliable-wall/40586/2 "2009-03-25T00:52:14Z")

</div>

If you want the impression to stay in the cloth then lower the angle and tension of restitution. Otherwise try lowering the stretch/compression resistance.

Duncan
