# Nurbs isoparms problem

**URL:** https://forum.highend3d.com/t/nurbs-isoparms-problem/50595
**Category:** Maya
**Tags:** modeling
**Created:** [June 19, 2002, 8:12am UTC](https://forum.highend3d.com/t/nurbs-isoparms-problem/50595 "2002-06-19T08:12:23Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![fedefritz](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/f/a183cd/32.png) [@fedefritz](https://forum.highend3d.com/u/fedefritz)
#### Post date: [June 19, 2002, 8:12am UTC](https://forum.highend3d.com/t/nurbs-isoparms-problem/50595/1 "2002-06-19T08:12:23Z")

</div>

Hi!  
Yesterday I was modelling using nurbs and can't insert new isoparms too close one to another. It was all ok if I insert them leaving enought space between them.  
Is there anyone who can tell me why this appens?  
Thanks.

Federico

---

<div class="post-metadata">

### Author: ![gmask](https://forum.highend3d.com/user_avatar/forum.highend3d.com/gmask/32/192_2.png) [@gmask](https://forum.highend3d.com/u/gmask)
#### Post date: [June 19, 2002, 8:18pm UTC](https://forum.highend3d.com/t/nurbs-isoparms-problem/50595/2 "2002-06-19T20:18:17Z")

</div>

I think the problem you are having is that maya will snap to the nearest Isoparm thinking you want to select it. YOu can defeat this feature by zooming in further or manually typeing int he selection in the channel box.
