# Polymesh-Nurbs Mesh!

**URL:** https://forum.highend3d.com/t/polymesh-nurbs-mesh/61203
**Category:** Xsi
**Tags:** modeling
**Created:** [August 20, 2002, 6:22am UTC](https://forum.highend3d.com/t/polymesh-nurbs-mesh/61203 "2002-08-20T06:22:59Z")
**Posts on this page:** 7
**Page:** 1

<div class="post-metadata">

### Author: ![highku](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/h/7ab992/32.png) [@highku](https://forum.highend3d.com/u/highku)
#### Post date: [August 20, 2002, 6:22am UTC](https://forum.highend3d.com/t/polymesh-nurbs-mesh/61203/1 "2002-08-20T06:22:59Z")

</div>

Hi!

Someone can help me??!!

I have a modelate object …How can I convert a Polymesh into a Nurbs Mesh?

Thanks a lot!!

---

<div class="post-metadata">

### Author: ![richard-sher](https://forum.highend3d.com/user_avatar/forum.highend3d.com/richard-sher/32/442_2.png) [@richard-sher](https://forum.highend3d.com/u/richard-sher)
#### Post date: [August 20, 2002, 11:07am UTC](https://forum.highend3d.com/t/polymesh-nurbs-mesh/61203/2 "2002-08-20T11:07:29Z")

</div>

At the moment, the only way is to shrinkwrap it with a nurbs sphere. (Modify\>Deform\>Shrinkwrap) That’s not going to work very well. (But it’s better than nothing.)

Why do you want to turn it into a NURBs object? Unless you have some specific reason for doing so, I’d just use subdivision surfaces instead.

---

<div class="post-metadata">

### Author: ![iya](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/i/9d8465/32.png) [@iya](https://forum.highend3d.com/u/iya)
#### Post date: [September 26, 2002, 5:59pm UTC](https://forum.highend3d.com/t/polymesh-nurbs-mesh/61203/3 "2002-09-26T17:59:10Z")

</div>

ApplyOp “PolyMeshPNet”, “”

---

<div class="post-metadata">

### Author: ![richard-sher](https://forum.highend3d.com/user_avatar/forum.highend3d.com/richard-sher/32/442_2.png) [@richard-sher](https://forum.highend3d.com/u/richard-sher)
#### Post date: [September 27, 2002, 12:21am UTC](https://forum.highend3d.com/t/polymesh-nurbs-mesh/61203/4 "2002-09-27T00:21:29Z")

</div>

PNet! I thought they took that out. Guess not. ![](http://64.32.63.100/forums/icons/smile.gif) There’s just no button for it.

---

<div class="post-metadata">

### Author: ![iya](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/i/9d8465/32.png) [@iya](https://forum.highend3d.com/u/iya)
#### Post date: [September 27, 2002, 11:13am UTC](https://forum.highend3d.com/t/polymesh-nurbs-mesh/61203/5 "2002-09-27T11:13:22Z")

</div>

Its not production ready anyway, no parameter access and slow if left proceduraly linked to source poly mesh but kind of neat to model with for that carved wood/clay look.

What else did they leave hidden in there?

---

<div class="post-metadata">

### Author: ![atyss](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/a/848f3c/32.png) [@atyss](https://forum.highend3d.com/u/atyss)
#### Post date: [September 27, 2002, 9:19pm UTC](https://forum.highend3d.com/t/polymesh-nurbs-mesh/61203/6 "2002-09-27T21:19:06Z")

</div>

Hi Graham!

There are a couple listed here:  
[http://www.xsibase.com/cgi-bin/yabb/YaBB.c…501644;start=10](http://www.xsibase.com/cgi-bin/yabb/YaBB.cgi?board=genxsi;action=display;num=1028501644;start=10)

Cheers  
Bernard Lebel

---

<div class="post-metadata">

### Author: ![iya](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/i/9d8465/32.png) [@iya](https://forum.highend3d.com/u/iya)
#### Post date: [September 30, 2002, 2:12pm UTC](https://forum.highend3d.com/t/polymesh-nurbs-mesh/61203/7 "2002-09-30T14:12:21Z")

</div>

Thanks, I wish there was more ![](http://64.32.63.100/forums/icons/frown.gif) and that soft would leave just tested or unsupported in progress stuff in there for us to play with but I guess thats for the beta testers.
