# Still stuck with "how to patchmodel a head"

**URL:** https://forum.highend3d.com/t/still-stuck-with-how-to-patchmodel-a-head/44652
**Category:** Maya
**Tags:** new-user
**Created:** [June 21, 2003, 2:52pm UTC](https://forum.highend3d.com/t/still-stuck-with-how-to-patchmodel-a-head/44652 "2003-06-21T14:52:47Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![drawallday](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/d/dec6dc/32.png) [@drawallday](https://forum.highend3d.com/u/drawallday)
#### Post date: [June 21, 2003, 2:52pm UTC](https://forum.highend3d.com/t/still-stuck-with-how-to-patchmodel-a-head/44652/1 "2003-06-21T14:52:47Z")

</div>

How can I loft 4 curves (one at top, one at left side, one at right side and one at the bottom) together like #18 in this tutorial [http://www.highend3d.com/maya/tutorials/patch/](http://www.highend3d.com/maya/tutorials/patch/) ?

---

<div class="post-metadata">

### Author: ![xcomb](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/x/bc79bd/32.png) [@xcomb](https://forum.highend3d.com/u/xcomb)
#### Post date: [June 23, 2003, 9:36am UTC](https://forum.highend3d.com/t/still-stuck-with-how-to-patchmodel-a-head/44652/2 "2003-06-23T09:36:24Z")

</div>

use boundary tool or square tool to make up the surface for those 4 curves that should do it make sure all curves are touching each other i mean vereces other wise you will not get sucessful results or it won't work at all