# Unlocking T-Bird

**URL:** https://forum.highend3d.com/t/unlocking-t-bird/71235
**Category:** Archived
**Tags:** hardware-discussions
**Created:** [March 20, 2001, 2:41pm UTC](https://forum.highend3d.com/t/unlocking-t-bird/71235 "2001-03-20T14:41:48Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![safandjaro](https://forum.highend3d.com/user_avatar/forum.highend3d.com/safandjaro/32/1026_2.png) [@safandjaro](https://forum.highend3d.com/u/safandjaro)
#### Post date: [March 20, 2001, 2:41pm UTC](https://forum.highend3d.com/t/unlocking-t-bird/71235/1 "2001-03-20T14:41:48Z")

</div>

is it the same trick as the duron? i’m building my buddy a system and just want to make sure before i run the pencil over it.

* * *

Windows 2000  
Abit KT7 non-raid  
Duron 700@1000  
Elsa Gladiac Ultra 64MB DDR  
512 MB Corsair SDRAM  
21" Sony F500  
3DMARK 2000 = 6915

---

<div class="post-metadata">

### Author: ![tacticalisthebest](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/t/58956e/32.png) [@tacticalisthebest](https://forum.highend3d.com/u/tacticalisthebest)
#### Post date: [March 20, 2001, 6:19pm UTC](https://forum.highend3d.com/t/unlocking-t-bird/71235/2 "2001-03-20T18:19:30Z")

</div>

I just did my 1.2B and it worked fine. I joined the 4 rows of dots in L1. I used conductive paint rather than a pencil - it seemed more likely to give reliable results.