# Which HW system for maya?

**URL:** https://forum.highend3d.com/t/which-hw-system-for-maya/71240
**Category:** Archived
**Tags:** hardware-discussions
**Created:** [March 19, 2001, 5:37pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240 "2001-03-19T17:37:03Z")
**Posts on this page:** 20
**Page:** 1

<div class="post-metadata">

### Author: ![cameronwalser](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/c/e99b99/32.png) [@cameronwalser](https://forum.highend3d.com/u/cameronwalser)
#### Post date: [March 19, 2001, 5:37pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/1 "2001-03-19T17:37:03Z")

</div>

We plan to set up 8-10 3D workstation for Maya on NT platform…  
What do you think is the best system for it:  
SGI, HP, Dell, Compaq, Ibm, Boxx…  
and for server?  
aspects: stability, speed, support, price  
thanx

---

<div class="post-metadata">

### Author: ![skelter](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/s/ecd19e/32.png) [@skelter](https://forum.highend3d.com/u/skelter)
#### Post date: [March 19, 2001, 6:05pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/2 "2001-03-19T18:05:47Z")

</div>

All these companies are good but personnaly i’m much more into DELL 'cause of their prices as well as IBM, but the best thing to do is testing each system with MAYA.

In Gold They Trust.

---

<div class="post-metadata">

### Author: ![blk](https://forum.highend3d.com/user_avatar/forum.highend3d.com/blk/32/59341_2.png) [@blk](https://forum.highend3d.com/u/blk)
#### Post date: [March 19, 2001, 6:53pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/3 "2001-03-19T18:53:40Z")

</div>

dont forget micron they make some good systems

---

<div class="post-metadata">

### Author: ![gwascak](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/g/cdc98d/32.png) [@gwascak](https://forum.highend3d.com/u/gwascak)
#### Post date: [March 21, 2001, 5:08pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/4 "2001-03-21T17:08:01Z")

</div>

Had an SGI and I just dumped it for a Precision 620 from Dell. This thing screams. I would recommend checking Dell’s refurbished system department.

---

<div class="post-metadata">

### Author: ![jandrew](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/j/a9adbd/32.png) [@jandrew](https://forum.highend3d.com/u/jandrew)
#### Post date: [March 21, 2001, 10:06pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/5 "2001-03-21T22:06:50Z")

</div>

SGI: Good support, lame box 🙂 TOO EXPENSIVE.  
DELL: Runaround support, good memory access.

Bah, I’m prejudiced.. I only do homebuilts here… the OEMs that were in place when I started are mostly garbage.

Sean

---

<div class="post-metadata">

### Author: ![cameronwalser](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/c/e99b99/32.png) [@cameronwalser](https://forum.highend3d.com/u/cameronwalser)
#### Post date: [March 22, 2001, 9:21am UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/6 "2001-03-22T09:21:31Z")

</div>

thanx for your opinion, but its not clear for me: Dell is good or not?

---

<div class="post-metadata">

### Author: ![jandrew](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/j/a9adbd/32.png) [@jandrew](https://forum.highend3d.com/u/jandrew)
#### Post date: [March 22, 2001, 7:33pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/7 "2001-03-22T19:33:33Z")

</div>

I’ve a homebuilder all the way, that way you get the best performance for the buck, and you could probably find a shop that can offer a better service contract than Dell, etc. cos they are close by. (You’ll have to pay for a good contract with anyone, whether they hide it in the price or add it at the bottom of the online ordering form haha)

If you need specs on what to choose, they are ALL over this board…  
check my site  
[http://eastvan.com/oc](http://eastvan.com/oc)  
for info about components and tuning them.

Sean

---

<div class="post-metadata">

### Author: ![cameronwalser](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/c/e99b99/32.png) [@cameronwalser](https://forum.highend3d.com/u/cameronwalser)
#### Post date: [March 27, 2001, 8:59am UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/8 "2001-03-27T08:59:04Z")

</div>

do you know something about boxx systems?  
they are used in Blur studio and assembled by [boxxtech.com](http://boxxtech.com)  
(wildcat etc)

---

<div class="post-metadata">

### Author: ![safandjaro](https://forum.highend3d.com/user_avatar/forum.highend3d.com/safandjaro/32/1026_2.png) [@safandjaro](https://forum.highend3d.com/u/safandjaro)
#### Post date: [March 27, 2001, 3:24pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/9 "2001-03-27T15:24:27Z")

</div>

yeah, they are overpriced…don’t get 'em.

i’m like sean, i’m going to be building 3-4 systems for 3d animation at my job…i built one as a prototype for $4,000  
it has the following:

1200MHz Thunderbird running at 1435MHz  
1.5 GB Corsair ECC memory  
Diamond FireGL2 64MB DDR  
30GB IBM Deskstar 75GXP ATA/100  
21" Sony CPD-G500 .24mm flat tube  
12x burner  
dvd player  
250mb internal zip drive  
etc.etc.etc.

holy crap, this system is disgustingly fast! maya and lightwave absolutely fly!!! if you can convince your superiors to go homebuilt do it! you get the best value and most stability. but of those choices:

stay away from sgi and boxx…toooooooo expensive for what you get, but supposedly great customer service (that’s what you pay for), i’d recommend one of the dell precision workstations, get the dual pentium 3 1GHz combo with SDRAM, not stupid RAMBUS. RAMBUS may sustain a higher data rate over time, but it’s like 3 times the cost of high quality SDRAM and you’ll barely notice the difference. Buy as much ram as you can afford to get, THERE IS NO SUCH THING AS TOO MUCH RAM!!! I learned the hard way with this. In college my buddies and I built a killer animation that takes place in an apartment which was modelled in every detail including electrical outlets, light switches, door hinges, phone cords, etc. and we were never able to raytrace it in maya!!! even with 2.5GB of disk swap we were getting out of memory errors. Maya is a memory hog!!! Good luck!

* * *

Windows 2000  
Abit KT7 non-raid  
Duron 700@1000  
Elsa Gladiac Ultra 64MB DDR  
512 MB Corsair SDRAM  
21" Sony F500  
3DMARK 2000 = 7104

---

<div class="post-metadata">

### Author: ![jandrew](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/j/a9adbd/32.png) [@jandrew](https://forum.highend3d.com/u/jandrew)
#### Post date: [March 28, 2001, 6:42am UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/10 "2001-03-28T06:42:28Z")

</div>

Nice kit.. of course, the monitor is most of the cost 🙂 but I’d make the same choices.

Make sure you’re using Athlon-C series chips, with the “266MHz” Frontside bus. VERY IMPORTANT. Abit KT7A’s and Asus A7V133’s are the motherboards of choice.

That said, DDR and 760MP around the next corner :-)))))

Sean

---

<div class="post-metadata">

### Author: ![digi9](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/d/3da27b/32.png) [@digi9](https://forum.highend3d.com/u/digi9)
#### Post date: [March 29, 2001, 6:59pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/11 "2001-03-29T18:59:30Z")

</div>

I just built a home system. It works beutifully, fast and efficient  
abit KT7A mB  
1.3 ghz Athlon  
768 MB ram  
36 gig 10k rpm cheetah hard drive.  
running win nt  
It works great as a workstation,  
I would build a couple of dual proc machines for rendering.

---

<div class="post-metadata">

### Author: ![safandjaro](https://forum.highend3d.com/user_avatar/forum.highend3d.com/safandjaro/32/1026_2.png) [@safandjaro](https://forum.highend3d.com/u/safandjaro)
#### Post date: [March 29, 2001, 9:15pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/12 "2001-03-29T21:15:44Z")

</div>

sweet, finally someone with a 1.3! Tell me, are you overclocking? if so, how high can you push it on the kt7a? what brand of memory are you using? what type of cooling? i’m wondering if it’s worth the extra money for the 1.3/1.33s.

* * *

Windows 2000  
Abit KT7 non-raid  
Duron 700@1000  
Elsa Gladiac Ultra 64MB DDR  
512 MB Corsair SDRAM  
21" Sony F500  
3DMARK 2000 = 7104

---

<div class="post-metadata">

### Author: ![jandrew](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/j/a9adbd/32.png) [@jandrew](https://forum.highend3d.com/u/jandrew)
#### Post date: [March 30, 2001, 8:44pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/13 "2001-03-30T20:44:28Z")

</div>

I read 1.5GHz air cooled with a 1.33 on another site yesterday.. sweeeeeeeeeeeeeeeeet.

Sean

---

<div class="post-metadata">

### Author: ![safandjaro](https://forum.highend3d.com/user_avatar/forum.highend3d.com/safandjaro/32/1026_2.png) [@safandjaro](https://forum.highend3d.com/u/safandjaro)
#### Post date: [March 31, 2001, 2:13am UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/14 "2001-03-31T02:13:53Z")

</div>

1.5GHz? that’s it? shoot, i posted at 1495 MHz the other day on a 1.2GHz, but dropped it back down to 1435 MHz for better stability with only an alpha cooler and a kick ass case with great cooling. i was hoping the 1.33’s could hit 1.6!!! now that would be nice! c’mon, dude, push that chip harder!

* * *

Windows 2000  
Abit KT7 non-raid  
Duron 700@1000  
Elsa Gladiac Ultra 64MB DDR  
512 MB Corsair SDRAM  
21" Sony F500  
3DMARK 2000 = 7104

---

<div class="post-metadata">

### Author: ![jandrew](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/j/a9adbd/32.png) [@jandrew](https://forum.highend3d.com/u/jandrew)
#### Post date: [March 31, 2001, 10:45pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/15 "2001-03-31T22:45:09Z")

</div>

Apparently, it was 1.5 GHz completely stable without ANY messing around, just changing the clock multiplier (that’s 1533 MHz, or 11.5x multiplier).

Going from 1.5 to 1.6 is a big deal at the limits of a processors manufacturing process. AMD themselves don’t expect to see much past 1.7, from what I have read. Being able to go from 1333 to 1533 without breaking a sweat is a big deal for this chip.

Unfortunately, I don’t have a 1.33 \>\>YET\<  
Sean

---

<div class="post-metadata">

### Author: ![technovia-ex](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/t/439d5e/32.png) [@technovia-ex](https://forum.highend3d.com/u/technovia-ex)
#### Post date: [April 4, 2001, 11:35pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/16 "2001-04-04T23:35:03Z")

</div>

If you would like information on supported machines… I work with all manufacturers and can give you any information that you may need to make an informed decision

---

<div class="post-metadata">

### Author: ![cameronwalser](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/c/e99b99/32.png) [@cameronwalser](https://forum.highend3d.com/u/cameronwalser)
#### Post date: [April 5, 2001, 9:38am UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/17 "2001-04-05T09:38:40Z")

</div>

It’s very kind of you, please help us to decide which system is the best to use with maya and with very complex models, e.g to build a very detailed city.  
e-mail: [sipilevi@freemail.hu](mailto:sipilevi@freemail.hu)

---

<div class="post-metadata">

### Author: ![wtyler](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/w/ce7236/32.png) [@wtyler](https://forum.highend3d.com/u/wtyler)
#### Post date: [April 6, 2001, 4:14am UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/18 "2001-04-06T04:14:22Z")

</div>

If you are depending on a machine for a business [eg 8-10 machines like buddy said] don’t over clock them. [yes I over clock my own home boxes but I don’t run “mission critical” applications on them.]

Go for a no bullshit vendor that will give you top support. Yeah local joe blow computer store supplys you with the sweet pimp athlon love with geforce card… but those places tend to fall apart beyond simple support.

These are statements I overheard with lame ass computer stores trying to sell gear to animators in the toronto area:

-Whats maya? Whats a license manager?  
-Yes a radeon is good for pro applications..

- it’ll take us 2 weeks to get a replacement part in…

etc.

You’ll want a place to be able to swap parts on the spot and are familar with high end demands for a series of graphics workstations.

So [censored] the cheap clone boxes and go get a line of workstations from sgi, IBM or dell. Get a good support contract… in some cases it may almost cost as much as the machines.

But you know what? If you are worried about the cost of the machines then you are your prioritys mixed up. Someone forgot to calculate their seat cost when budgetting for a business. Buying alot of software licenses will eat up a fair bit a change.. but even that combined with the hardware will pale for the salarys of the people you’ll have to pay to work behind the machines.

So go for whoever gives you the best support package.. the last thing you need is the inability to meet a delivery because of flaky gear.

I mentioned Dell , Ibm and sgi since thats the 3 brands we use at where I work [150+ workstations]. Actually we have a few compaqs as well but the sysadmins don’t like them. As for the Dells [admistration], SGI’s [workstations] and IBM’s [avid] anything goes wrong and we have it fixed or replaced the same day.. usualy within a few hours.

---

<div class="post-metadata">

### Author: ![joojaa](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/j/5daacb/32.png) [@joojaa](https://forum.highend3d.com/u/joojaa)
#### Post date: [April 6, 2001, 3:14pm UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/19 "2001-04-06T15:14:53Z")

</div>

Yup avoid compaq machines they stink!

---

<div class="post-metadata">

### Author: ![cameronwalser](https://forum.highend3d.com/letter_avatar_proxy/v4/letter/c/e99b99/32.png) [@cameronwalser](https://forum.highend3d.com/u/cameronwalser)
#### Post date: [June 12, 2001, 9:52am UTC](https://forum.highend3d.com/t/which-hw-system-for-maya/71240/20 "2001-06-12T09:52:10Z")

</div>

and what do you think about SGI Zx10 workstation?  
…  
and MacOSX solution?

[Next page](https://forum.highend3d.com/t/which-hw-system-for-maya/71240.md?page=2)
